Description
Heat Powered Wood Stove Fan, Log Burner Fan and Fireplace Accessories for Faster Heat
-
Lower heating bills, same stove: the fan runs on stove heat alone, with no electricity or batteries to buy
-
Heat reaches every corner: the log burner fan pushes warm air off the stove top and around the room
-
Quiet enough to forget it's there: sound stays at 25 dB or below while it runs
-
No babysitting the stove: a bimetallic safety device protects the fan in high-heat conditions
-
Won't rust from the heat that powers it: the anodized aluminum body resists corrosion as it warms
Feed the same amount of wood into the stove and still feel a cold corner across the room — that is the problem this fireplace fan is built to solve. Set on top of a wood burning stove, the six blades spin using nothing but the stove's own heat, no cord, battery or switch required, and push warm air out into the room instead of letting it stall over the firebox. That means less wood burned for the same warmth, and a room that actually catches up to the fire. The fan starts turning at a low 122°F (50°C), so it is already working while the stove is still warming up.
The six-blade design and larger air volume raise room air circulation efficiency by more than 55% over a bare stovetop, and the anodized aluminum body will not rust or corrode as it heats and cools day after day. A sturdy base keeps the fan from wobbling or tilting even at its top speed, and a bimetallic safety device protects the internals if the stove runs unusually hot. It fits most freestanding stove types without a difficult installation, so it drops onto a regular or small stove as easily as a large one.
Why choose Fewpe
Heat Powered Stove Fan
| Feature |
Fewpe |
Others |
| No electricity or batteries to run it |
✓ |
Needs power |
| Air circulation up 55% over a bare stove |
✓ |
✕ |
| Runs at 25 dB or quieter |
✓ |
Louder |
| Anodized aluminum resists rust from heat |
✓ |
Plain metal |
| Steady base at full stove heat |
✓ |
Can wobble |
| 30-day easy returns |
✓ |
Varies |
Key Features
-
Heat Powered & Save Your Bills: the fan draws its energy from the stove itself, so nothing is added to the power bill.
-
Under 25 DB, Quiet and Efficient: operating noise stays low while the fan circulates air.
-
Suits Most Fireplaces Perfectly: it fits most freestanding wood stoves without a complicated setup.
-
Overheat Protection: the fan is built to guard itself against running too hot.
-
No Electricity Needed: there is no cord, battery or outlet involved in running it.
-
Airflow of 360 m³/h: the fan moves about 212 CFM of air across the room.
-
Sound Level as Low as 25 dB: even at full speed the fan stays close to silent.
-
Fast Warm-Up: room temperature can rise 37.4 to 41°F (3 to 5°C) in under 15 minutes.
-
Won't Rust or Corrode: the anodized aluminum build holds up as the fan heats and cools.
-
Steady on the Stovetop: a wide base keeps the fan from wobbling or tilting even at full speed.
-
Critical Components Stay Protected: the fan's bimetallic safety device guards them when conditions turn hot.
Specifications
-
Material: Aluminum
-
Blade: 6 Blade
-
Speed: 1400 rpm
-
Noise: ≤25 db
-
Power: Thermoelectric Module
-
Operating Temperature Range: 122°F to 662°F (50°C to 350°C)
-
Air Volume: 160-210 CFM (272-357 m³/h)
-
Product Size: Length 6.3 in (160 mm), Height 6.6 in (168 mm)
-
Airflow: 360 m³/h (212 CFM)
-
Temperature Rise: 37.4 to 41°F (3 to 5°C) in less than 15 minutes
-
Air Circulation Efficiency Improvement: more than 55%
Package Includes:
- Fireplace Fan x1
- Thermometer x1
- User Manual x1
Right for you if
-
✓You want a wood stove that heats the room faster — the fan raises air circulation over 55%
-
✓You are tired of a cold corner far from the stove — the fan pushes warm air across the room
-
✓You don't want another cord or battery to manage — it runs on stove heat alone
-
✓You want to cover a bigger room — a 2-fan set is available to spread heat further
If two or more of these sound like you, this is the one.
FAQs
Q: Does this fireplace fan need electricity or batteries?
A: No, it runs entirely on heat recovered from the stove, so there is no cord or battery to manage.
Q: At what temperature does the fan start spinning?
A: It starts operating at a low 122°F (50°C), so it is already moving air while the stove warms up.
Q: Is the fan safe on a hot wood stove?
A: Yes, an anodized aluminum base and a bimetallic safety device protect the fan in high-heat conditions up to 662°F (350°C).
Q: How loud is the fan while it runs?
A: Very quiet — noise stays at 25 dB or below during operation.
Q: Can I buy more than one fan?
A: Yes, a 2-fan set is available to distribute heat more evenly through a larger room.
