Description
Cabinet Hardware Jig, Shelf Pin Jig with HSS Drill Bits, Self Centering Drill Guide
-
No more wandering holes: the self-centering tip locks on before the bit ever touches wood
-
Drill bits that outlast the job: high-speed steel edges stay sharp through repeated use
-
Swap a worn bit in seconds: the drill bit is replaceable, so you never replace the whole jig
-
One jig for the whole kitchen: works on pulls, knobs, closet shelving, and hinge plates
-
Clean holes, not splinters: the guide keeps bits from wandering or tearing out the back
Installing new cabinet pulls or shelf pins usually means marking each spot by hand and hoping the drill doesn't wander. This cabinet hardware jig lines the bit up for you, so every hole lands where you marked it instead of an inch to the left. The 3-point centering tip grips the surface first, which keeps the bit from walking and leaves the hole clean and tear-out-free.
It works like a self centering drill bit built into a guide: two included bits, 0.2 in (5mm) and 1/4" (6.3mm), fit standard shelf-pin holes and hardware handles, and both are HSS steel so they hold an edge through repeated drilling. As a woodworking jig it earns its keep on more than shelves — the same acrylic alignment guide doubles as a drilling jig for hinge plates, so it works as a hinge jig too, and every drill guide jig detail, from the springs to the replaceable bits, is built for repeat use in the shop.
Why choose Fewpe
Shelf Pin Drilling Jig
| Feature |
Fewpe |
Others |
| Self-centering tip stops the bit from wandering |
✓ |
✕ |
| Two HSS drill bits included, 0.2 in and 0.2 in |
✓ |
1 bit only |
| Bits are replaceable when they wear out |
✓ |
Fixed bit |
| Guide handles pulls, knobs, shelving, and hinges |
✓ |
Pulls only |
| Acrylic guide about 10.1 x 6.1 in |
✓ |
Varies |
| 30-day easy returns |
✓ |
Varies |
Key Features
Here is what else it brings to the shop:
-
Perfect centering: A three-point tip bites into the surface first so the bit can't drift, leaving clean, accurate holes with no tear-out.
-
Two bit sizes included: Two bit sizes come with the jig, 0.2 in (5mm) and 1/4" (6.3mm), covering standard shelf-pin holes and the holes hardware handles need.
-
Durable HSS drill bits: Made from industrial high-speed steel, the bits are built to hold their edge through job after job.
-
Replaceable drill bits: Bits pop out of the self-centering guide, which rides on built-in springs, so a worn tip is replaced without replacing anything else.
-
Versatile applications: From kitchen pulls and drawer knobs to closet shelving and hinge plates, the acrylic guide measures about 10.1 x 6.1 in (25.6 x 15.6 cm) and handles them all.
Specifications
-
Drill bit sizes: 0.2 in (5mm) and 1/4" (6.3mm)
-
Guide dimensions: approximately 10.1 x 6.1 in (25.6 x 15.6 cm)
-
Drill bit material: high-speed steel (HSS)
Package Includes:
- 1 x Precision Shelf Pin Drilling Jig
Right for you if
-
✓You're installing new shelf pins in cabinets — the self-centering tip keeps every hole on mark
-
✓You need bits for both standard sizes — 0.2 in and 1/4 in bits are included
-
✓You want one jig for the whole kitchen — it works on pulls, knobs, shelving, and hinge plates
-
✓You don't want to rebuy the jig when a bit dulls — the drill bits are replaceable
If two or more of these sound like you, this is the one.
FAQs
Q: What sizes of drill bit are included?
A: Two bits come with the jig, 0.2 in (5mm) and 1/4 in (6.3mm), for standard shelf-pin holes and hardware handles.
Q: Can the drill bits be replaced?
A: Yes — the bits are replaceable, and the self-centering guide rides on built-in springs for stable drilling.
Q: What is the guide made of?
A: The alignment guide is acrylic and measures about 10.1 x 6.1 in (25.6 x 15.6 cm), with high-speed steel drill bits.
Q: What can I use this jig on?
A: It is built for kitchen pulls, drawer knobs, closet shelving, and hinge plates.
Q: Does it stop the bit from wandering?
A: The three-point centering tip grips first, so the bit stays put and the hole comes out clean and tear-out-free.
