Description
Automatic Wire Stripper for Drill, Electric Cable Stripper and Wire Twister Tool
-
Strip and twist in one motion: this electrician tool skips the two-step job
-
No nicked cores: this wire stripping tool clears insulation in about one second
-
Matches your wire gauge: the adjustable 0.39-1.38 in strip length handles 6-14 AWG solid wire
-
Twist without a separate tool: connect 2-5 wires in 10 seconds with a leak-proof nylon cap
-
Built to outlast daily use: premium zinc alloy resists wear and heat on the jobsite
Stripping and twisting wire by hand eats up a job, one wire at a time, with nicked cores and sore fingers by the end of the day. Chuck this tool into your drill and that two-step process becomes one pull of the trigger — insulation clears away in about a second without cutting into the copper underneath.
The stripper body is machined from premium zinc alloy, while the wire twister is forged from 40CR cast steel for a smooth, wear-resistant edge. A standard 1/4 inch hexagonal shank chucks into most corded and cordless drills, so the same tool handles household, industrial and general jobsite wiring.
Why choose Fewpe
Wire Stripper Twister
| Feature |
Fewpe |
Others |
| Drill-powered, no manual squeezing needed |
✓ |
Hand-operated |
| Twists 2-5 wires in 10 seconds with sealed caps |
✓ |
✕ |
| Zinc alloy body resists wear and heat |
✓ |
Plastic body |
| Adjustable strip length, 0.39 to 1.38 in |
✓ |
Fixed length |
| Set of 5 strippers plus caps and tools included |
✓ |
1 tool only |
| 30-day easy returns |
✓ |
Varies |
Key Features
Every detail that makes this stripper and twister do double duty:
-
Time and Labor Saving: combines stripping and wire-twisting into one pass so you spend less time and effort per connection.
-
AWG Compatibility: built for 6, 8, 10, 12 and 14 AWG standard solid hard wire.
-
Zinc Alloy Construction: the body is made from premium zinc alloy that stands up to wear and heat.
-
Adjustable Stripping Length: the telescopic rod sets a stripping length anywhere from 0.39 to 1.38 in (10-35 mm).
-
Drill-Powered: runs off an electric drill and fits most corded and cordless models.
-
Rapid Stripping: clears the insulation layer in about 1 second without harming the wire core underneath.
-
Wire Twisting: the parallel connection device joins 2-5 wires in 10 seconds, sealed with an insulated flame-retardant nylon wire cap to prevent leakage.
-
Hexagonal Shank: a versatile 1/4 inch hexagonal shank chucks into a wide range of electric drills.
Specifications
-
Stripping Length: 0.39-1.38 in (10-35 mm)
-
Wire Gauge Compatibility: 6/8/10/12/14 AWG
-
Stripping Time: 1 second
-
Wire Connection Capacity: 2-5 wires
-
Twisting Time: 10 seconds
-
Shank Size: 1/4 inch hexagonal
-
Wire Twisting Tool Material: 40CR cast steel, forged using high-temperature extraction
Package Includes:
- 5 wire strippers
- 1 wire stripper connecting rod
- 1 replacement blade
- 1 L-shaped hexagonal wrench
- 1 silver 1/4 inch wire twister tool
- 5 wire caps in sizes P1, P2, P3, P4 and P6
- 1 instruction sheet
Materials
The stripper is crafted from premium zinc alloy, and the wire twisting tool is forged from 40CR cast steel using high-temperature extraction for a smooth, hard, wear- and heat-resistant finish; the wire caps are made of insulated flame-retardant nylon to keep the connection electrically safe.
Right for you if
-
✓You rewire outlets or splice cable at home — works with 6-14 AWG solid wire
-
✓You want stripping and twisting in one tool — connects 2-5 wires in 10 seconds
-
✓Your current stripper nicks the copper — clears insulation in about 1 second
-
✓You own a corded or cordless drill already — the 1/4 in hex shank fits most models
If two or more of these sound like you, this is the one.
FAQs
Q: What gauge wires does this wire stripper handle?
A: It's built for 6, 8, 10, 12 and 14 AWG standard solid hard wire.
Q: Does the wire stripping tool need its own power source?
A: No, it runs off an electric drill through its 1/4 inch hexagonal shank, and fits most corded and cordless drills.
Q: Can I adjust how much insulation is stripped?
A: Yes, the telescopic rod sets a stripping length anywhere from 0.39 to 1.38 in (10-35 mm).
Q: How do I connect stripped wires together?
A: The parallel connection device twists 2-5 wires together in about 10 seconds, sealed with an insulated flame-retardant nylon wire cap.
Q: What's included with the wire stripper for drill?
A: Five wire strippers, a connecting rod, a replacement blade, a hex wrench, a wire twister tool, five wire caps and an instruction sheet.
